This is a fully functioning Daytona SA-58 OCW gun with 6 Midcaps (1 midcap with white mark doesn't stay secure in speedloader adapter, but does lock into gun with tiny amount of wobble), 2 HiCaps, 1 Large HiCap (1000 rounds), Odin Speedloader Adapter and Three different types of lube recommended by Daytona. As far as I know, this kit was originally assembled by rizzio and does have a hole on top of receiver allowing you to make quick hopup adjustments. Comes with a 455mm PDI Barrel IR-Hop'd with Flat Bucking. Was recorded to shoot 360 fps @ 120psi with .32s (can be tuned down to 1.8J for field limits but would not recommend any further due to not cycling properly, smaller barrel length or CQB bolt is needed to lower fps without decreasing PSI). An easy way to bring this down to 1.5J is with a 363mm barrel which I might have a brass one laying around if you do want one. This FAL specifically is known to have the hardest "felt" recoil out of every daytona gun, and it's crazy fun to shoot in full auto. Some things to note about mines specifically is that there is a missing screw on one side and different colored screws on the other. This is because the original screws had stripped threads. This absolutely does not change the functionality of the gun and the top rail is secured in place extremely well. Gun will come already lubricated and should last every thousand or two shots (they require FREQUENT lubrication). I am selling this because I find myself playing less and less often nowadays. This is easily quite a bit over $1000 if you were to build it yourself without labor, hassle and tooling of course. Really fun guns to shoot.